CARVART offers an innovative selection of modern, exceptionally crafted and pre-engineered railing systems in five (5) mounting approaches that blend fluidly into every type of facility plan.

The system provides exceptional quality, panel alignment and structural integrity so glassRAILINGS are not only visually consistent with the designer’s vision, but will also be easy to maintain throughout its entire life cycle.

glassRAILINGS are delivered as a turnkey solution that includes hardware, glass, comprehensive engineering and final coordination services so they are not only easy to design and integrate but also simple to install and maintain. CARVART glass RAILINGS are ideal for stairways, guard rails, safety rails, or hand rails. See our image gallery below for recent installations.

FEATURES AND BENEFITS

Our innovative hardware system for glass RAILINGS provide unmatched benefits. Our dry glaze technique provide cost savings beyond the products and continue to construction, railing installation, and post-installation maintenance. See how partnering with CARVART can improve your projects.

LIGHTWEIGHT

Structural hollow aluminum base is light-weight and easy to carry. Reversible shoe for ergonomic and flexible access install

ADJUSTABILITY

Adjustable wedge-clamp enable easy install, reducing labor time. Dry-glazed system facilitates clean install and eliminates need for messy permanent adhesive/grout.

COORDINATION

Shoes/rails can be sent out early for pre-install and sequencing of accelerated schedules. All finish fascias, finish caps and weather-resistant seals snap-in easily after heavy structural work.

INSTALLATION

Gaskets are easily replaced vs. the conventional approach using permanent silicon adhesive. No additional structure required to install by GC or sub-contractors

TOP MOUNT

Surface mounted shoe that runs horizontally above / into the floor structure.

CARVART offers an innovative selection of modern, exceptionally crafted and pre-engineered railing systems in five (5) mounting approaches that blend fluidly into every type of facility plan.
With a wide range of specification options, CARVART glassRAILINGS can integrate seamlessly into nearly every facility design plan. The system
provides exceptional quality, panel alignment and structural integrity so glassRAILINGS are not only visually consistent with the designer’s vision, but will also be easy to maintain throughout its entire life cycle.
CARVART’s glassRAILINGS are more comprehensive than other railing systems offering a wide selection of hardware and hundreds of decorative glass options to coordinate perfectly with other glass elements throughout the building. glassRAILINGS are delivered as a turnkey solution that includes hardware, glass, comprehensive engineering and final coordination services so they are not only easy to design and integrate but also simple to install and maintain.
Most importantly, CARVART glassRAILINGS meet and exceed the new, more stringent building codes recently enacted.

Types

TM Exposed Mount

Minimal surface mounted shoe design that runs horizontally above the floor structure.

TM Concealed Mount

Inset hardware track design that mount horizontally into floor structure and sits flush at floor level. Add-on optional floor caps provide a clean, finished look next to most flooring materials.

Specifications

glassRAILINGS > TOP MOUNT > EXPOSED (RAIL-TM)
Minimal surface mounted shoe design that runs horizontally above the floor structure. Finish fascias and metal covers are also available in several configurations depending on the design and installation needs.

glassRAILINGS > TOP MOUNT > CONCEALED (RAIL-TM)
Inset hardware track design that mount horizontally into floor structure and sits flush at floor level. Add-on optional floor caps provide a clean, finished look next to most any flooring material. Hardware can be mounted horizontally on floors or stair stringers
and concealed or set flush into almost any finish material leaving only glass exposed. Snap-on finish caps are also available to integrate into adjacent materials.

FACILITY DESIGN APPLICATIONS

Stair railings, guardrails, balconies, atriums, terraces, event spaces or decorative balusters. Straight runs, corners and shape-cut transitions. Stairway configurations: single flight, multiple flight and landings. Indoor and outdoor spaces.

FUNCTION

Barrier protection/division, stairway divider, fall prevention, navigation/way-finding.

GLASS TYPES

Refer to local code and structural requirements Tempered laminated and tempered monolithic.

GLASS FINISHES

Refer to Finish Chart CARVART laminated transparent glass design options available: 01 Core, 02 Color, 03 Pattern, 04 Metallic, 05 Textile, 08 Gradient and 10 Covert.

SURFACES

Smooth Glass. Etched Glass.

GLASS THICKNESS

Refer to local code and structural requirements Accommodates 5/8” Nominal up to 1” Nominal - 3/4”.

CONCEALED MOUNT HARDWARE TRACK

3” wide x 5” high nominal light-weight, aluminum structural shoe. Supplied in lengths up to 118”. Designed for a dry-glazed installation. Pre-engineered, machined mounting holes. Reversible shoes mount in both directions. Weather-resistant, moisture barrier seals. Mounting fasteners and anchors to be supplied by others.

CONCEALED MOUNT HARDWARE OPTIONS

Finish options: flush fit, snap-in finish cap/fascia integrate or replace adjacent materials.

EXPOSED MOUNT HARDWARE TRACK

HARDWARE MATERIALS/FINISHES

Refer to Finish Chart Satin anodized aluminum. Brushed stainless aluminum.

WIDTHS — OVERALL MINIMUM/ MAXIMUM RANGE (inches):

Glass panels: minimum width of 12” and maximum width of 60”. Maximum run lengths (straight, stairway and landings): unlimited.

HEIGHTS — OVERALL MINIMUM/ MAXIMUM RANGE (inches):

Glass panels: minimum 12” Height; maximum 43” height above finished floors.

MOUNTING FASTENERS

Final anchoring decisions is client-directed or based on client structural consultant. Mounting fasteners and anchors to be supplied by others. CARVART advisory available.

STRUCTURAL LOAD/IMPACT CAPACITIES

Refer to local code and structural requirements Rated up to 200 lbs. impact test and approximately 50 lbs. per linear foot. Ratings and certifications available upon request. Calculation services are available from CARVART at additional expense. Final structural requirements are client-directed or based on client structural consultant.

ADD-ON DESIGN OPTIONS

Per specification and upcharges apply Smooth glass tops: Innovative post-polish edges. Top Caps: rounded oblong, rectangular, minimal rectangular. Base LED lighting: open base cavity in all shoe mount designs (LED’s by others). Top LED lighting: Integrated in rounded oblong and rectangular (LED’s by others). Mitered inside and outside corners (installation and configuration not provided by CARVART). Minimal, butt-jointed open reveals.

CUSTOMIZATION

Designed to each project specification uniquely. Meets most custom layouts.

INSTALLATION

Dry glazed adjustable wedge-clamp. Reversible shoe for ergonomic and flexible access install. Post-installation adjustment system ensures easy alignment of long-run railings. Requires trained and competent glazing industry professional. Installation instructions, assistance and training available at time of order.

HARDWARE WARRANTY

5-year limited warranty.
For more info, contact CARVART Sales Advisory Team at [email protected] or call us at 212 675 0030.

Details

Options

OBLONG TOP-CAP

Larger top-cap design for grip and aesthetic. This model can house optional LED lights (LED not supplied by CARVART)

MINIMAL TOP-CAP

Minimal top-cap has sleek, rectangular design that also incorporates optional LED lights (LED not supplied by CARVART)

NO TOP-CAP

Innovative post-polished edges enable a clean look without a top-cap.

Top-Caps

Design appeal and detailing

Innovative post-polished laminated glass creates near-perfect edges and eliminates the need for top caps.

Ease of installation

Post-installation adjustment system (up to 1.5° in both directions, 3° overall) ensures easy alignment of long-run railings.

LIGHTWEIGHT & ERGONOMIC

Structural hollow aluminum shoe is light-weight and easy to carry
Reversible shoe for ergonomic and flexible access install

ADJUSTABLE/ INNOVATIVE HARDWARE

Adjustable wedge-clamp enable easy install, reducing labor time
Dry-glazed system facilitates clean install and eliminates need for messy
Adjustable gasket can accommodate various glass thicknesses.
Standardized glass panel sizes can be installed anywhere

COORDINATION/ EXPEDITED SCHEDULES

Shoes/rails can be sent out early for pre-install and sequencing of accelerated schedules
All finish fascias, finish caps and weather-resistant seals snap-in easily after heavy structural work.

SIMPLISTIC INSTALLATION

Gaskets are easily replaced vs. the conventional approach using permanent silicon adhesive
No additional structure required to install by GC or sub-contractors

Life cycle maintenance

LOW LABOR COST

Conventional systems have much higher labor costs due to complex installation methods. CARVART glassRAILING products are designed to be light-weight and ergonomic to facilitate easy installation.

EASY TO REPLACE

Intermediate panels are removable and replaceable due to dry-glazed system.

CLEANING AND MAINTENANCE

Virtually no maintenance outside of cleaning once the system is in place and installed. Profiles have minimum reveals and crevices to collect dirt and grime.

DRAINAGE AND WATER SHED

Weather-resistant seals prevent most moisture from entering the system and CARVART continuous rails can be engineered to drain any excess moisture that does enter the profile.

Project management coordination

Coordination of custom glass and hardware machining (shape-cut glass pieces)
Project management services and training for duration of project
Years of experience handling numerous high-profile, complex railing projects

COORDINATION AND SHOP DRAWINGS

CARVART offers full scheduling coordination and phasing for custom project delivery
Full range of coordination and shop drawing/ engineering services
Dedicated project managers are assigned to each project for maximum success

HARDWARE OPTIONS

Provide full range of hardware options for infinite design and site conditions
Multiple design options (top caps, LED integration, various finishes)

GLASS DESIGN AND DEVELOPMENT

Glass design and development services integrate standard and custom glass selections with available hardware options

POST-DELIVERY SERVICES

Installation training that is specific to project and product
Project-specific service levels (including phased deliveries and shipping)
Project logistics can ship by floor or designated area

Pre-engineered solution

DRY-GLAZED ASSEMBLY

Innovative wedge-clamps and dry-glazed assembly make CARVART glassRAILINGS easy to install and perform calculations on in custom conditions where life-safety is a concern

STRUCTURAL INTEGRITY AND RATINGS

Certifications and ratings available upon request; CARVART products adhere to stringent impact and structural code requirements.
Impact and typical linear load testing available (rated to US impact codes)

Pre-engineered solution

Pre-drilled machining/holes are spaced for maximum structural strength and integrity

SIDE MOUNT

Hardware designed to mount on a vertical plane to a side structure.

CARVART offers an innovative selection of modern, exceptionally crafted and pre-engineered railing systems in five (5) mounting approaches that blend fluidly into every type of facility plan.
With a wide range of specification options, CARVART glassRAILINGS can integrate seamlessly into nearly every facility design plan. The system
provides exceptional quality, panel alignment and structural integrity so glassRAILINGS are not only visually consistent with the designer’s vision, but will also be easy to maintain throughout its entire life cycle.
CARVART’s glassRAILINGS are more comprehensive than other railing systems offering a wide selection of hardware and hundreds of decorative glass options to coordinate perfectly with other glass elements throughout the building. glassRAILINGS are delivered as a turnkey solution that
includes hardware, glass, comprehensive engineering and final coordination services so they are not only easy to design and integrate but also simple to install and maintain.
Most importantly, CARVART glassRAILINGS meet and exceed the new, more stringent building codes recently enacted.

Types

SM Exposed Mount

Minimal surface mounted shoe design that mounts on a vertical plane to a side structure.

SM Concealed Mount

Inset hardware track design that mounts on a vertical plane to a side structure and is covered by other finish surface materials.

Specifications

glassRAILINGS > SIDE MOUNT > EXPOSED (RAIL-SM)
Minimal surface mounted shoe design that mounts on a vertical plane to a side structure. Finish fascia and metal covers are also available in several configurations depending on the design and installation needs.

glassRAILINGS > SIDE MOUNT > CONCEALED (RAIL-SM)
Inset hardware track design that mounts on a vertical plane to a side structure and is covered by other wall surface materials. Hardware can be mounted vertically on slab-edges or stair stringers and concealed or set flush into almost any finish material leaving only glass exposed. Snap-on finish caps are also available to integrate into adjacent materials.

FACILITY DESIGN APPLICATIONS

FUNCTION

Barrier protection/division, stairway divider, fall prevention, navigation/way-finding.

GLASS TYPES

Refer to local code and structural requirements Tempered laminated and tempered monolithic.

GLASS FINISHES

Refer to Finish Chart CARVART laminated transparent glass design options available: 01 Core, 02 Color, 03 Pattern, 04 Metallic, 05 Textile, 08 Gradient and 10 Covert.

SURFACES

Smooth Glass. Etched Glass.

GLASS THICKNESS

Refer to local code and structural requirements Accommodates 5/8” Nominal up to 1” Nominal -3/4”.

CONCEALED MOUNT HARDWARE TRACK

CONCEALED MOUNT HARDWARE OPTIONS

Finish options: flush fit, snap-in finish cap/fascia integrate or replace adjacent materials.

EXPOSED MOUNT HARDWARE TRACK

HARDWARE MATERIALS/FINISHES

Refer to Finish Chart Satin anodized aluminum. Brushed stainless aluminum.

WIDTHS — OVERALL MINIMUM / MAXIMUM RANGE (inches):

Glass panels: minimum width of 12” and maximum width of 60”. Maximum run lengths (straight, stairway and landings): unlimited.

HEIGHTS — OVERALL MINIMUM / MAXIMUM RANGE (inches):

Glass panels: minimum 12” Height; maximum 43” height above finished floors.

MOUNTING FASTENERS

Final anchoring decisions is client-directed or based on client structural consultant. Mounting fasteners and anchors to be supplied by others. CARVART advisory available.

STRUCTURAL LOAD/IMPACT CAPACITIES

ADD-ON DESIGN OPTIONS

Per specification and upcharges apply Smooth glass tops: Innovative post-polish edges. Top Caps: rounded oblong, rectangular, minimal rectangular. Base LED lighting: open base cavity in all shoe mount designs (LED’s by others). Top LED lighting: Integrated in rounded oblong and rectangular (LED’s by others). Mitered inside and outside corners (installation and configuration not provided by CARVART). Minimal, butt-jointed open reveals.

CUSTOMIZATION

Designed to each project specification uniquely. Meets most custom layouts.

INSTALLATION

HARDWARE WARRANTY

5-year limited warranty.
For more info, contact CARVART Sales Advisory Team at [email protected] or call us at 212 675 0030.

Details

Options

OBLONG TOP-CAP

Larger top-cap design for grip and aesthetic. This model can house optional LED lights (LED not supplied by CARVART)

MINIMAL TOP-CAP

Minimal top-cap has sleek, rectangular design that also incorporates optional LED lights (LED not supplied by CARVART)

NO TOP-CAP

Innovative post-polished edges enable a clean look without a top-cap.

Top-Caps

Design appeal and detailing

Innovative post-polished laminated glass creates near-perfect edges and eliminates the need for top caps.
Ideal for historic buildings where limited visual modifications are required

Ease of installation

Post-installation adjustment system (up to 1.5° in both directions, 3° overall) ensures easy alignment of long-run railings.

LIGHTWEIGHT & ERGONOMIC

Structural hollow aluminum shoe is light-weight and easy to carry
Reversible shoe for ergonomic and flexible access install

ADJUSTABLE/ INNOVATIVE HARDWARE

Adjustable wedge-clamp enable easy install, reducing labor time
Dry-glazed system facilitates clean install and eliminates need for messy permanentadhesive/grout
Pre-drilled anchoring holes on two sides for pass through access. Includes structural sleeve/collar for anchors.
Adjustable gasket can accommodate various glass thicknesses.
Standardized glass panel sizes can be installed anywhere

COORDINATION/ EXPEDITED SCHEDULES

Shoes/rails can be sent out early for pre-install and sequencing of accelerated schedules
All finish fascias, finish caps and weather-resistant seals snap-in easily after heavy structural work.

SIMPLISTIC INSTALLATION

Gaskets are easily replaced vs. the conventional approach using permanent silicon adhesive
No additional structure required to install by GC or sub-contractors

Life cycle maintenance

LOW LABOR COST

Conventional systems have much higher labor costs due to complex installation methods. CARVART glassRAILING products are designed to be light-weight and ergonomic to facilitate easy installation.

EASY TO REPLACE

Intermediate panels are removable and replaceable due to dry-glazed system.

CLEANING AND MAINTENANCE

Virtually no maintenance outside of cleaning once the system is in place and installed. Profiles have minimum reveals and crevices to collect dirt and grime.

DRAINAGE AND WATER SHED

Weather-resistant seals prevent most moisture from entering the system and CARVART continuous rails can be engineered to drain any excess moisture that does enter the profile.

Project management coordination

Coordination of custom glass and hardware machining (shape-cut glass pieces)
Project management services and training for duration of project
Years of experience handling numerous high-profile, complex railing projects

COORDINATION AND SHOP DRAWINGS

CARVART offers full scheduling coordination and phasing for custom project delivery
Full range of coordination and shop drawing/ engineering services
Dedicated project managers are assigned to each project for maximum success

HARDWARE OPTIONS

Provide full range of hardware options for infinite design and site conditions
Multiple design options (top caps, LED integration, various finishes)

GLASS DESIGN AND DEVELOPMENT

Glass design and development services integrate standard and custom glass selections with available hardware options

POST-DELIVERY SERVICES

Installation training that is specific to project and product
Project-specific service levels (including phased deliveries and shipping)
Project logistics can ship by floor or designated area

Pre-engineered solution

DRY-GLAZED ASSEMBLY

Innovative wedge-clamps and dry-glazed assembly make CARVART glassRAILINGS easy to install and perform calculations on in custom conditions where life-safety is a concern

STRUCTURAL INTEGRITY AND RATINGS

Certifications and ratings available upon request; CARVART products adhere to stringent impact and structural code requirements.
Impact and typical linear load testing available (rated to US impact codes)

Pre-engineered solution

Pre-drilled machining/holes are spaced for maximum structural strength and integrity

STAND-OFF

Stand-off post mount design that projects glass panels away from a vertical side wall structure and facilitate air flow between the glass and building structure while providing a clean minimal look.

Types

SO Exposed Mount

Stand-off post design that projects glass panels away from a vertical side wall structure and facilitate air flow between the glass and building structure while providing a clean minimal look.

Specifications

glassRAILINGS > SIDE MOUNT > STAND-OFF (RAIL-SO)
Exposed stand-off post design that projects glass panels away from a vertical side wall structure and facilitate air flow between the glass and building structure. While this configuration is typically meant for interior use, glassRAILINGS > Side Mount > Stand-Off can also be used in exterior applications for easy drainage and installation.

FACILITY DESIGN APPLICATIONS

FUNCTION

Barrier protection/division, stairway divider, fall prevention, navigation/way-finding.

GLASS TYPES

Refer to local code and structural requirements Tempered laminated and tempered monolithic

GLASS FINISHES

Refer to Finish Chart CARVART laminated transparent glass design options available: 01 Core, 02 Color, 03 Pattern, 04 Metallic, 05 Textile, 08 Gradient and 10 Covert

SURFACES

Smooth Glass. Etched Glass.

GLASS THICKNESS

Refer to local code and structural requirements Accommodates 5/8” Nominal up to 1” Nominal - 3/4”.

EXPOSED STAND-OFF HARDWARE

2” diameter tamper proof hardware fasteners, based on application. 1-9/16” diameter slotted, adjustable depth design, based on application.

HARDWARE MATERIALS/FINISHES

Refer to Finish Chart Satin anodized aluminum. Brushed stainless aluminum.

WIDTHS — OVERALL MINIMUM / MAXIMUM RANGE (inches):

Glass panels: minimum width of 12” and maximum width of 60”. Maximum run lengths (straight, stairway and landings): unlimited.

HEIGHTS — OVERALL MINIMUM / MAXIMUM RANGE (inches):

Glass panels: minimum 12” Height; maximum 43” height above finished floors.

MOUNTING FASTENERS

Final anchoring decisions is client-directed or based on client structural consultant. Mounting fasteners and anchors to be supplied by others. CARVART advisory available.

STRUCTURAL LOAD/IMPACT CAPACITIES

ADD-ON DESIGN OPTIONS

CUSTOMIZATION

Designed to each project specification uniquely. Meets most custom layouts.

INSTALLATION

HARDWARE WARRANTY

5-year limited warranty.
For more info, contact CARVART Sales Advisory Team at [email protected] or call us at 212 675 0030.

Details

Options

OBLONG TOP-CAP

Larger top-cap design for grip and aesthetic. This model can house optional LED lights (LED not supplied by CARVART)

MINIMAL TOP-CAP

Minimal top-cap has sleek, rectangular design that also incorporates optional LED lights (LED not supplied by CARVART)

NO TOP-CAP

Innovative post-polished edges enable a clean look without a top-cap.

Top-Caps

Design appeal and detailing

Innovative post-polished laminated glass creates near-perfect edges and eliminates the need for top caps.

Minimal hardware is ideal for contemporary buildings that require this aesthetic.

Ease of installation

Post-installation adjustment system (+/- 3/4” overall) ensures easy alignment of long-run railings.

ADJUSTABLE/ INNOVATIVE HARDWARE

Adjustable stand-offs enable easy installation and reduced labor time • Dry-glazed system facilitates clean install and eliminates need for messy permanent adhesives • Adjustable, slotted stand-offs can accommodate various glass thicknesses • Standardized glass panel sizes can be installed anywhere

COORDINATION/ EXPEDITED SCHEDULES

• Stand-offs can be sent out early for pre-install and sequencing of accelerated schedules

SIMPLISTIC INSTALLATION

• Stand-offs are easily replaced vs. the conventional approach using permanent silicon adhesive • No additional structure required to install by GC or sub-contractors

Life cycle maintenance

LOW LABOR COST

Conventional systems have much higher labor costs due to complex installation methods. CARVART glassRAILING products are designed to be light-weight and ergonomic to facilitate easy installation.

EASY TO REPLACE

Intermediate panels are removable and replaceable due to dry-glazed system.

CLEANING AND MAINTENANCE

Virtually no maintenance outside of cleaning once the system is in place and installed. Profiles have minimum reveals and crevices to collect dirt and grime.

DRAINAGE AND WATER SHED

Weather-resistant seals prevent most moisture from entering the system and CARVART continuous rails can be engineered to drain any excess moisture that does enter the profile.

Project management coordination

Coordination of custom glass and hardware machining (shape-cut glass pieces)
Project management services and training for duration of project
Years of experience handling numerous high-profile, complex railing projects

COORDINATION AND SHOP DRAWINGS

CARVART offers full scheduling coordination and phasing for custom project delivery
Full range of coordination and shop drawing/ engineering services
Dedicated project managers are assigned to each project for maximum success

HARDWARE OPTIONS

Provide full range of hardware options for infinite design and site conditions
Multiple design options (top caps, LED integration, various finishes)

GLASS DESIGN AND DEVELOPMENT

Glass design and development services integrate standard and custom glass selections with available hardware options

POST-DELIVERY SERVICES

Installation training that is specific to project and product
Project-specific service levels (including phased deliveries and shipping)
Project logistics can ship by floor or designated area

glassRAILINGS

FEATURES AND BENEFITS

Our innovative hardware system for glass RAILINGS provide unmatched benefits. Our dry glaze technique provide cost savings beyond the products and continue to construction, railing installation, and post-installation maintenance. See how partnering with CARVART can improve your projects.

LIGHTWEIGHT

ADJUSTABILITY

COORDINATION

INSTALLATION

TOP MOUNT

SIDE MOUNT

STAND-OFF

glassDOORS

Commercial Bath

NEW YORK STUDIO

CHICAGO STUDIO